Geeetech I3X X Carriage Upgrade
Description
Upgraded X Carriage For The I3X ( Mine Is A Geeetech Acrylic Frame Version ) Saves 75% Weight Compared To Stock ( Mod V4 ) Based On Beyondwind & Riansolutions (Remix) Design Things: 982921 & 1043124 I Have Included A Few Significant Improvements : Printable Z Height Increased By 20Mm ( Extruder Mounted Higher Much Like Stock Carriage ) Cable Mounting Point Much Much Easier Belt Fitting Mechanical End-Stop Trigger Built In ( If Needed ) Can Use 3 Or 4 Lm8Uu Bearings Or 2 Lml8Uu ( Mod & Mod V3 ) Downside Is This Now Needs Support To Print ( Highly Recommend Using Cura 2.3 To Slice & Enable Roof Support & Support Everywhere, Print With Endstop Pointing Up, Rotate Model 45 Degrees Clockwise On Bed ) Update 26/10/16 Modv3 Alows For Extruder Motor To Be Mounted 15Mm Further Towards The Front Of The Machine If Desired , This Will Allow The Extruder Motor To Clear The X Idler Giving Edge To Edge Print Volume (215 Mm On X Axis ) , If Motor Is Mounted In The Forward Position It Will Also Allow More Clearance For Larger Hotends. Modv4 Includes All Features Of Modv3 But Only Allows The Use Of 3 Lm8Uu Bearings , Uses 5 Meters Less Filament And Looks A Bit Smoother, Makes For A Very Light Setup ( 77G With 3 X Lm8Uu Bearings , Stock Is 300G) Video In Action Here : Https://Www.Youtube.Com/Watch?V=F0Ojqcskula Update 27/10/16 Fan Duct Now Available Update 01/11/16 Early Version Files Removed. Update 12/10/16 Video Added.
Statistics
Likes
32
Downloads
0