Rigidbot Power Supply Upgrade - Back plate system
Description
This Is The Back Plate Mounting System For The 24V 550W Atx Style Power Supply Upgrade For An Rigidbot Or Rigidbot Big (Rb1 Or Rbb) While Still Using The Original Main Board. These Back Plates Provide A Common System For Mounting The New Upgraded Power Supply And Connecting It To The Original Stock Main Board Through A Kycon Adapter On Both The Regular And The Big. There Are Three Stl Files. The Power Side. The Rb1 Main Board Side, And The Middle. The Power Supply And Rb1 Board Sides Work On Either Size Of Printer. The Middle Section Is Required Only For The Big. Designed To Be Printed On A 10 X 10 Bed So That A Regular Printer Can Print Its Own Upgrade. A Big Can Fit All Three Parts At Once. The Files Are Cura Scaled And Oriented For Printing. The Rest Of The Kit Parts Can Be Found At The Link Below With Additional Pictures And Instructions. Http://Www.Thingiverse.Com/Thing:1712645 Note The Print And Post Print Instructions Below.
Statistics
Likes
9
Downloads
0