Sunhokey Replacement X-Carriage with E3D Mount
Description
This Is A Complete Rework Of The Carriage Assembly For The Sunhokey Prusa I3 2015 Model. Might Be Usable On Other Prusa Clones Too. This Is A Mashup With Tech2C'S E3D Mount And 13Djjc13'S X Carriage Along With My Own Modifications. I Did All The Modifications Within 3Dsmax. The Main Things Here I Did Was Made It So I Could Mount Tech2C'S Mount To 13Djjc13'S Carriage. Along With That, I Made The Following Changes To Tech2C'S Excellent Mount. <Ul> <Li>I Added A Bracket To Support The Cooling Fan For The Hotend-Heatsink. </Li> <Li>Utilizing The Added 40Mm Heatsink Fan, I Added A Bracket Where You Can Attach A Led Light.</Li> <Li>I Modified The E3D Clamp Slightly, And Added An Additional Piece To Guide The Wires.</Li> <Li>I Adjusted The Z-Probe To Use A Set Screw Instead Of The Traditional Nuts, Which Aren'T Suited For Quick Adjustments And Can Rattle Loose. </Li> <Li>I Made The Fan Duct Adjustable, And Made Other Tweaks To Help Point The Airflow Directly Under The Tip.</Li> <Li>I Adjusted The Model To Fit A 40Mm Turbo Fan. (Now, I Know A 50Mm Is More Traditional For Turbofans, But What I Happened To Have Was A 40Mm Fan. So, I May Make A Variation For A 50Mm If I Get My Hands On One.)</Li> </Ul>
Statistics
Likes
79
Downloads
0