Raspberry Pi Case Mount for FolgerTech FT-5
Description
I Use My Raspberry Pi 3 To Control My 3D Printers But I Also Wanted It Portable So I Could Take It With Me Without Being Tethered To A Power Cord. That Led Me To Follow This Path > Http://Www.Thingiverse.Com/Thing:1503651 Which Is A Battery Powered Option With A 7" Raspi Screen. After I Built The Folgertech Ft-5, I Couldn'T Find An Easy Way To Mount The Heavy Case And The Attached Camera Since The Build Surface Is Very High. This Led Me To The Simple Bracket That Slides Over The Electronics Cabinet Of The Ft-5 And Prevents The Raspi Case From Being Knocked Off. It Also Gets It High Enough That, With A Long Ribbon Cable, The Camera Can Be Mounted Up On The Top Rail. That Mount Will Be Presented In Another 'Thing'. I'M Attaching Both The Stl File And The 123D Design File So That You Can Make It Fancy If You Choose (Radii, Etc) Or Modify It To Fit Your Case. Also, Realized That I Might Need Access To The Usb Ports On The Raspberry Pi If I'M Using A Dongle Or Hooking It To The Usb Port On The Ft-5, So The 'Modified' Version Provides That Access.
Statistics
Likes
4
Downloads
0