Hanging Door Roller
Description
This Repository Contains Parts To Mount A Sliding Door On A Rail. When I Was Renovating My House, I Had To Remove The Sliding Doors. The Existing Sliding Door Was Hanging Too Low For The New Carpet And Underlay (It'S A Few Mm Thicker) And The Existing Bracket Did Not Have The Range Of Adjustment To Suit The Thicker Carpet. Understandably, After 20 Or So Years, The Rubber Wheels Were Perished Too. I Looked At What Was Available In New Zealand And Not Only Were The Replacements Pretty Expensive, They Wouldn'T Really Suit The Poor Installation Of The Existing Doors. The Rails In My House Are Mounted Too High Into The Wall And It'S Not Possible To Simply Remove The Door By Unhooking It And Lifting It Off. The Design Of The Included Part Allows You To Install The Wheel Bracket Separately From The Door, And Then Attach Them. This Process Is Difficult But I'M Not Sure If There Is An Alternative, And It Does Work. For Latest Parts And More Details Visit Https://Github.Com/Ioquatix/Hanging-Door-Roller
Statistics
Likes
34
Downloads
0