Prusa i3 Y Carriage Support
Description
Update: To Solve Most Problems With The Y Axis See Http://Www.Thingiverse.Com/Thing:1999279 => See Also My Other Prusa I3 Reworks In [My Collection](Http://Www.Thingiverse.Com/7Steam/Collections/My-Prusa-I3-Reworks) Brackets For Supporting The Arms Of The Y-Carriage Of An Prusa I3 Printer. This Will Help To Reduce Wiggling Of The Y-Carriage, With Improves Printing Quality And Eases Print Bed Leveling. Installation Might Be A Bit Fiddly, But You Don'T Need To Disassemble Anything. Print Two Copies, One Mirrored. Insert A Cable Tie From The Top Half Way Through The Hole. Insert The Bracket With The Cable Tie From The Side Between The Rod And The Y-Frame. Use A Needle-Nose Plie For Tightening The Cable Tie And A Utility Knife For Cutting. See Pictures For More Details. The Brackets Will Fit At The Side With The Single Linear Bearing. On The Side With Two Bearings Is No Additional Support Needed.
Statistics
Likes
0
Downloads
0