MPCNC 525 - Das Boot
Description
Modified Dust Boot For The Mpcnc. I Adjusted The Hose Inlet To Fit The Tapered Extension That Came With My Shop Vac, It'S Approx 1 1/2" And Is Press Fit. Lower Half Channels The Suction To Directly Around The Bit For Better Clearing. The Lower Portion Slides Onto The Upper Half And Is Easily Removed For Better Access. You'Ll Need To Remove The Lower Collar From The Dewalt Dw660 Which Is A 5 Minute Job. Still Have To Fit This One To The Machine And See If It Needs Adjustment, Still A Wip. **Designed For Use With The Hicwic Universal Tool Mounts, Specifically I Used It On "Qr_660_V5.Stl" In This Set; Https://Www.Thingiverse.Com/Thing:1245848
Statistics
Likes
41
Downloads
0