Router Circle Cutting Jig
Description
<H3>Customizable Router Circle Cutting Jig</H3> This Is A 2D Openscad Model That Can Be Manipulated To Create A 3 Layer Cnc/Laser Cut Model For Creating A Circle Cutting Jig For A Standard Router Or Plunge Router. Using A Long Bolt I Cut Off The End, Welded A Jamb Nut To It, And Ground The End To A Point. Here Are The Variables: **Jiglength**=Length From Center To Center Of Concentric Circles Of Jig **Bit**=Diameter Of The Bit Or Template Bit Used On Router **Contour**=Radius Of Smaller Concentric Circle On Outside Of Jig **Holedia**=Diameter Of Mounting Holes **Holenum**=Number Of Holes For Mounting **Holedist**=Distance From The Center Of The Router To The Center Of The Mounting Holes **Holeangle**=Change The Rotation/Orientation Of The Mounting Holes Around The Center **Trackbolt**=Width Of The Sliding Track, Needs To Be Adjusted A Few Times To Accept The Nut And Bolt **Routerbaserad**=Radius Of The Router Base **Padding**= Area Around The Outside Of The Router Base **Res**=Resolution If Extruding To 3D I Extruded Everything To Dxf For Proper Manipulation. Using This Handle To Lock The Pin In Place: Http://Www.Thingiverse.Com/Thing:1879190 I Also Countersunk The Mounting Holes So The Heads Of The Bolts Did Not Scratch The Work Piece. I Then Sanded And Applied 2 Coats Of Varnish/Linseed Oil Mix.
Statistics
Likes
537
Downloads
0