versatile and robust steadycam gimbal
Description
The Gimbal Is Designed To Have Versatile Mounting Options: - M12 For Standard Camera Rigs With 15Mm Rods. 0° & 45° With 60Mm Spacing, 90° Single - 1/4 Inch For Standard Camera Screws With 20 40 And 60 Mm Spacing On The Side - 4Mm For Other Mountings Used Standard Parts: - 4X: M3X16 + 2 Washers + 1 Nut - 4X: M6X25 + (Optional Small Washer) + Nyloc Nut - 4X: D6 D12 H4 Radial Bearing - 2X: D8 D16 H5 Radial Bearing - M8 Threaded Rod (Or Other 8Mm Rod/Tube) To See If Your Printer Calibration Fits To To The Tolerances Used In The Design I Made 2 Test Parts: - Test 1: The Gimbal Uses The Dimensions Of The First Hole 6/10.1 (Marked Green In The Sketch). Print The Testpart And See If The M6 Screw Has A Tight Fit. If It Does Not Fit Or Is To Loose, You Need To Edit The 3D Files. - Test 2: To Check The Thightnes Of The M12 Adapters. The Design Has 11.4Mm In The 0° And 45° Holes. For The One Hole Along The Vertical Axis It Uses 11.7Mm (My Printer Makes Holes In This Plane Tighter As Designed)
Statistics
Likes
81
Downloads
0