bq ciclop remix with T slot extrusion and LED lights with RF remote controler
Description
<A Href="Https://Www.3Dhubs.Com/Service/235195" Data-3Dhubs-Widget="Button" Data-Hub-Id="235195" Data-Type="Orderwidget" Data-Color="Green" Data-Size="Large" Data-Text="Order A 3D Print" >Order A 3D Print</A> Find Bom At The End Of This Page. These Is Upgraded Version Of The Scanner With T-Slot Frame With Led Lights And Rf Remote Controller For Led Light Up On The Object For Perfect Scans. Assembling Is Same As The Original Bq, Just Instead Of Long Screw In This Remix I Used T-Slot Extrusion And Modified The Parts To Fit The Extrusion, However, And The Back Cover Is Modified And Using Now Magnets Instead Slots To Hold In Place. The Distance From Camera Lens To Center Of The Table In Horizontally Line Should Be 30-30.5 Cm, As This Distance Will Put The Table In Full Of Camera Picture Size, However Sometimes The Camera Focus Need To Be Touched Too. I Thin There Is Youtube Video For This. Stl Are Prepared For Both Abs Or Pla The Ciclop 3D Scanner Is A 100% Open Source Project. As With All Products Of The Bq Diy Ecosystem, Ciclop And Horus Have Been Made Freely Available Under Cc-By-Sa And Gpl. All Information On The Mechanical Design, The Electronics, And The Software Have Been Made Freely Available To The Community, To Become Part Of The Technological Heritage Of Humanity. Easy To Build, The New Bq Ciclop Is A 3D Rotational Laser Triangulation Scanner. It Uses 2 Lasers Projected Over An Object To Capture The Geometry And Texture As It Rotates On A Turntable. Ciclop Is A Diy Scanner. It Requires Manual Setup, However, This Makes It Possible To Accurately Calibrate The Device For Your Intended Use Thus Achieving Optimum Results For Your Particular Task. <A Href="Http://Asterosltd.Bigcartel.Com/Product/Bq-Ciclop-Diy-3D-Scanner-Red-Color-Parts-And-T-Slot-Extrusion-Only" Target="_Blank">Need The Printed Parts And T-Slot Pre-Cut Parts Ready For You Find Here</A> <A Href="Https://Rover.Ebay.Com/Rover/1/711-53200-19255-0/1?Icep_Id=114&Ipn=Icep&Toolid=20004&Campid=5337951138&Mpre=Http%3A%2F%2Fwww.Ebay.Com%2Fitm%2Fbq-Ciclop-Diy-3D-Scanner-Red-Color-Parts-With-Led-Lights-Remote-Controlled-%2F252387627935%3Fsspagename%3Dstrk%3Amese%3Ait" Target="_Blank">Need This Scanner Full Kit Find Here</A> <A Href="Http://Asterosltd.Bigcartel.Com" Target="_Blank">Check Also My Other Items Here</A> <A Href="Http://Stores.Ebay.Com/Asterosltd?_Rdc=1" Target="_Blank">Or Visit My Ebay Shop</A> <A Href="Https://Rover.Ebay.Com/Rover/1/711-53200-19255-0/1?Icep_Id=114&Ipn=Icep&Toolid=20004&Campid=5337951138&Mpre=Http%3A%2F%2Fwww.Ebay.Com%2Fsch%2Fi.Html%3F_Sacat%3D0%26_Nkw%3Dt%2Bslot%2Baluminum%2Bextrusion%26_Frs%3D1" Target="_Blank">T-Slot Custom Length Here</A> <Iframe Width="560" Height="315" Src="Https://Www.Youtube.Com/Embed/Jhx74Ejhzaw" Frameborder="0" Allowfullscreen></Iframe> T Slot Nuts And Bolts - 8Pcs M8X10Mm Bolt - 1Pcs M8X25Mm (Laser Holder Mount) - 2Pcs M3X12Mm(Step Motor Mount) - 4Pcs M3X12Mm+Nut (Laser Fixing) - 2Pcs
Statistics
Likes
96
Downloads
0