i3 X Axis Linear Rail System
Description
*While Usable, This Is Still A Wip* I Designed This To Replace The 8Mm Smooth Roads On My Hesine M505 With 400Mm Mgn12 Linear Rails And 10Mm Wide Belts. This Design Incorporates A Floating X Axis Idler To Help Reduce Z Wobble Artifacts. Currently It Is Using An Old Fan Duct Design And It Is Also Compatible With My Z Endstop Adjuster. I Will Later Update This For Use With 450Mm Rails (What I Should Have Ordered), And Different Pulley Sizes. Note That This Is For Printers With A Spacing Of 22Mm Between Lead Screw And Smooth Rod Centres. Lm10 Version Now Availiable. 2016/11/15 Now With Even More Overkill. Sfu12 Ballscrews And Lm10 Smooth Roads. Bom; Mk8 Extruder Idler, Spring And Supplied M3 Bolts. 2X 400Mm Mgn 12 Linear Rails And 2X H (Long) Blocks. 16/20T 5Mm Bore G2T Gear And Idler Pulley 1X M5X20 Bolt + Nut An Assortment Of M3X 5/10/15/20 Tbd + Nuts 1X M3X40Mm Small Piece Of Ptfe Tube
Statistics
Likes
80
Downloads
0