Geeetech i3 Z-Axis Top-Caps for 200mm Stepper/Leadscrews by BrendaEM
Description
These Top Caps Allow The Use Of Cheaper But Shorter 200Mm Leadscrews/Stepper, Commonly Found On Ebay And Amazon. They Feature A Longer Bearing Surface Than The Original Part. Note: Minor Fitting Is Required From The Leadscrew, Which Can Be Done With A Rolled-Up Piece Of Fine Sandpaper Wrapped Around A Wooden Dowel. Please Clean The Bore Afterwards, And Lubricate With A Filament-Comparable Lube. The Leadscrew Should Turn Freely In The Bore; Make Sure The Part Is Fitted So That It Does Not Climb Or Dive As The Leadscrew Turns. V2, Is Updated Model, As In Picture. I Am Sorry For Any Problems. My Patreon Page: Https://Www.Patreon.Com/Brendaem --Brendaem
Statistics
Likes
5
Downloads
0