Nema 17 Stepper Crank
Description
A Small Hand Crank For Nema 17 Stepper Motor. I Was In Need A Easy Way To Turn The Z Axis Stepper Motor On My Shapeoko 2 Cnc, So Here It Is. The Crank Can Accept Shaft With 5Mm Diameter, And Use 2 8Mm~12Mm M3 Socket Head Screw, And 2 Normal M3 Nuts. Does Not Need Support. Note: The Slot For The M3 Nuts Were Made A Bit Tight, Which Allowed Me To Insert Heated M3 Nuts For A Solid Fit.
Statistics
Likes
51
Downloads
0