Golf 2 Central Console Plates
Description
This Is A 3D-Printable Plate For The Centralconsole Of The Golf/Rabbit Mk2. Best Choise For Adding Instruments To Your Golf/Rabbit ! Normal Instruments Are 52Mm (2 Inch). There Are Several Versions. Please Contact Me If You Have Any Ideas Or Suggestions On This ;) Screws Needed Are 3-4Mm (1/10Inch - 1/6Inch) Plastic Or Sheetscrews First Of All Print The Holders And The Alignment-Plate. Screw The Holders To The Alignment-Plate (You Need To Gauge Them To Fit To The Alignment-Plate). Then Stick The Plate Into The Console As Shown On The Pictures And Screw The Holders To The Central Console (Ratchet Or Short Screwdriver Needed). Remove The Alignment-Plate And Screw On The Plate You Want. You Can Also Use The Alignment-Plate As A Pattern To Use Wood Or Such. Have Fun. Edit. Actually Put That In My Car Lol. Works Nice :D
Statistics
Likes
105
Downloads
0