Raspberry Pi 7 inch LCD stand
Description
This Remix Has: - Enlarged Counter Bore Allowing Flanged Screws To Be Used. - Shallower Bore Allowing Short Screws Be Used (6Mm Length Minimum (4Mm Threaded Length/2Mm Head) - Bottom Screws Have Offset Clearance Cutout In The Leg For Large Screwdrivers. - Slightly More Clearance Around The Usb Port Nearest To The Leg (Makes It Stand 2Mm Taller) - Slightly Wider Legs To Recoved Lost Strength Due To Clearance Hole. Please Note There Is A Left And A Right (You Can Swap Them Around If You Like) But They Are Mirrored, So The Single Stl File Contains Both.
Statistics
Likes
9
Downloads
0