FlySight SpeXman One (SPX01) FPV Video Goggles Faceplate add on

Description

Hi Flysight Fpv Goggles Owners, I Don'T Know About You But I Like Very Much My Goggles. The Only Two Negative Things I Found Were: 1- The Lack Of Integrated Dvr Which Is Essential For Safety When You Crash And Need To Look For Your Quad And For Tracking Your Fpv Piloting Improvement. 2- Not So Comfort. Anyway To My Face. I Found Easycap To Be A Fair Solution Although Integrated Dvr Will Reduce The Cable Mess So This Fixes The Dvr Lack For The Comfort I Designed A Printed Faceplate Which Improves Wonderfully The Comfort. For This Faceplate Upgrade You Will Need: 3D Printer To Print The Plate Laser Cut Or Hobby Knife To Cut Out The Foams 4 1.5Mm*4-6 Screws: Http://Bit.Ly/2G7Fuau 8-10Mm Foam - Semi Hard 8-10Mm Foam - Soft So: 1. Print The Faceplate And The Little Parts 2. Lasercut Or Cut Out The Foams 3. Possession The Faceplate As Described In The Image 4. Add The Little Parts To Secure The Faceplate With The 1.5Mm Screws 5. Add Glue And Then Apply The Hard Foam 6. Add Glue And Then Apply The Soft Foam Enjoy!

Statistics

Category

Tags