LIT-AF (Acro 5inch FPV Quad)

Description

5 Inch Miniquad Designed To Mount A Runcam Owl Style Camera (With A U-Mount) On The Front. Basic 5Inch Quad Copter Design That Can Be 3D Printed Or Cut Out In Carbon Fiber (Recommended). Supply Or Print Your Own Standoffs To Mount The Fc/Pdb And Top Plate. The Motor Mounting Holes Are 19Mm Apart So This Quad Is Limited To 2204 Motors Up. I Recommend 2204 2300Kvs On 4S With Triblad 5Inch Props. Print Out With Any Amount Of Infill As You Like. Personally Would Go 10% Honeycomb To Save Weight Because Lets Face It - If You Crash A 3D Printed Quadcopter, It Doesn'T Make A Difference If You Print With 10% Or 100% It'S Going To Break Anyways.

Statistics

Category

Tags