608, 625, & 607 bearing Concave Surface Fidget Spinner Buttons MK3.1 (Press Fit)

Description

*Update* Another Member Pointed Out That My Models Weren'T Perfectly On The Bed In The Design, Which Most Decent Slicer Programs Would Point Out To You And/Or Automatically Correct. So I Put Them On The Bed And Re-Uploaded Everything. *Update* If You Find These Fidget Spinner Buttons Well Designed And Useful, Please Leave A $1 Tip To Encourage Me To Create More. I'M Happy To Redesign These For Any Bearing Size. I Also Have A Project In The Works To Create A Fidget Spinner Customizer. So You Can Put In The Size Of Your Bearings And A Few Other Details And It Will Create A 3-5 Arm Fidget Spinner Automagically. *Update* I Noticed A Problem With The Sizing Of The Female Portion Of The 607 Bearings. So I'Ve Adjusted It. They Are Now At Mk1.2. (Previously At Mk1.1). *Update* I'Ve Added 607 Bearing Fidget Spinner Buttons (Caps) To The Mix. They Are At Mk1 And Are Currently Untested Until My 607 Bearings Arrive. But I Based Them Off Of My 625 Bearing Fidget Spinner Buttons So I Have Great Confidence In Them Working Fine. *Update* I'Ve Updated The 625 Bearing Fidget Spinner Buttons To Mk3.1, I Had To Add A Small Ring To Keep The Buttons From Interfering With The Spinning Of The Bearing. *Update* I Increased The Tolerance On The Press Fit So That They Will Now Press Together Easier, And Possibly Come Back Apart Again Without Breaking. I Also Added A Medium Size To The 608 Series, And Made Several Adjustments To The 625 Series. All Fs Buttons Are Now At Mk3. *Update* I Increased The Concavity On All The Buttons So Everything Is Now At The Mark 2 Or Mark 2.1 Version. *Update* Due To The Apparent Popularity Of My Fidget Spinner Buttons, I Was Inspired To Redesign These With A Higher Face Count So The Mk2'S Are Now Smoother And Have Bevels. I Also Added Standard Sized Spinner Buttons And Labeled Them Both For The 608 Bearing. I Also Included 625 Bearing Fidget Spinner Buttons. I'Ve Been Obsessing About Fidget Spinners Lately. I'Ve Made More Than 20. I Like The Buttons For Them To Snap Together And Have A Concave Surface. It'S A Tactile Thing. While There Are Other Fidget Spinner Buttons Here That Meet Both Of Those Requirements. They Are All Too Big And Cover Over The Really Nice Ceramic Bearnings That I Got. So I Designed These From Scratch To Be Concave, Snap Together, And Not Hide The Workings Of The Bearings. I Print These Out On The Zortrax That We Have In The Shop. It Gives Great Detail And Need Almost No Finishing On The Pieces. I Print These In Abs, Pla Isn'T Sturdy Enough To Print Fidget Spinners That Will Last. I Recommend You Use At Least Abs Or A Higher Grade Plastic To Print All Your Fidget Spinner Buttons And Accessories.

Statistics

Category

Tags