Direct Geared Belted Extruder 1,75mm
Description
<H3>Direct Geared Belted Extruder 1,75Mm (V1)</H3> ---- <H5>This Model Has Been Superseeded For A V2.</H5> New Model Has Been Turned 90 Degrees: <A Href="Http://Www.Thingiverse.Com/Thing:1966872" Target="_Blank">Direct Geared Belted Extruder V2 (1,75Mm)</A> ---- If You Are Looking For A Bowden Version, You Should Go See My <A Href="Http://Www.Thingiverse.Com/Thing:1764551" Target="_Blank">Belted Extruder V.3 For 1.75</A> Instead. <H5>Key Features</H5> <Ul><Li>Compact Highly Accurate, Easy To Use And -Install Direct Drive Geared Belted Extruder For All 1,75Mm Filaments.</Li> <Li>Gearings 1:3.75</Li> <Li>Weight <I>Including Motor</I>: 316G - This Is Inclusive All Gears, Belt, Screws, Nuts Etc.. <Br>Please Note That A Standard Normal Nema 17 Weights 290G In Itself, So 316G Is Very Light</Li> <Li>Only Quality Items Used To For Higher Longelevity And Accuracy.</Li> <Li>No Exotic, Hard To Find Expensive Parts Used.</Li> <Li>Set And Forget Idler System - Try It! :)</Li> <Li>Prusa Compatible Mount Hole Spacing.</Li> <Li>Silent Running Due To Belt Operation.</Li> <Li>Mount Holes For Optional Usage Of Expansions.</Li> </Ul> <H5>Expansions Options</H5> <Ul><Li>Option To Mount Sensors Or Other Expansion Behind Hotend. <Li>Cooling Solution Can Be Mounted On Expansion Slots Instead Of On Hotend</Li> <Li>Opton To Mount Cable Management, Motor-Cover, Fans And Other Expansions Next To Motor.</Li> </Ul> <H5>Nema 17 Used</H5> <Ul><Li>I Am Using Nema 17 "Pancake" As In Flat Model.</Li> <Li>Manufacturer Part Number: 17Hm08-1204S <Br>0.9Deg Nema 17 Stepper Motor 1.2A 11Ncm/15.6Oz.In 42X42X20Mm <Br>I Found It On German Ebay.</Li> <Li>You Can Reuse Whatever Nema 17 You Might Have, But Using A Smaller Motor Dramatically Decreases The Weight.</Li> </Ul> <H4>Usage Requirment</H4> While This Direct-Drive Belted Extruder 1,75Mm (V1) Has Standard Hole Mount Spacing Of 23Mm Center To Center Of The Mount Holes, You Are Going To Do One Of The Following 3 Options: <Ol><Li>Use A Modified X-Carriage, Which I'Ll Provide Soon.</Li> <Li>Remove 1-2Mm Of The Top Of Your Existing Carriage.</Li> <Li>Use A 8-9Mm Spacer-Plate To Put Between Your Existing Carriage And The Extruder.</Li> </Ol> <H4>Buy One?</H4> I Am Selling These. Also Just The Metal Parts. Drop Me A Message If Interested. I Live In Denmark And Can Ship For Dkkr 35 In Denmark, But Let Me Know Where You Live, And We'Ll See. <H4>3D Model And Files?</H4> I Do Not Offer Up The Extruder In Other Fileformats Than Stl, But You Can <A Href="Http://A360.Co/2Fy4Rkj" Target="_Blank">See The Model</A> On Myhub On Autodesk'S Servers.
Statistics
Likes
83
Downloads
0