Zerotech DOBBY prop connector
Description
This Is The Prop Connector That Is Sometimes Breaking. I Have Designed It For Better Printing And More Durability, So The Thing Has Not The Original Measurements. After Printing You Must Drill All 3 Holes With 1,5Mm And Then The Outer Ones With 2Mm. It Is A Little Bit Tricky Because You Must Drill Straight And Not To Slow(2Mm Holes). But The Connector Works Nice :-) Use Threadlocker Medium For The Screws, So You Dont Need To Full Tighten The Screws And You Can Adjust The Tightness !
Statistics
Likes
18
Downloads
0