E3d Servo auto level prusa i3 or hypercube
Description
Video Tutorial I Used To Set Up Auto Level Https://Www.Youtube.Com/Watch?V=Awsi9Bmndja&T=15S Update 12/5/16 Fan Duct Rev 2: Fixed Mounting Ear. Removed Front Of Duct So I Can See My Nozzle. The Old Version Made Hard To Make Sure My First Layer Was Going Down Right. I Added 2 Nozzles To Aim Air At The Front. Print With Supports Touching Build Plate For Best Results 12/2/16 Fan Duct Added- Not Perfect One Mounting Whole Is Off I Just Drilled One. Ill Fix It Later This Week. Print In Cura With Supports Touching Build Plate Only. Rev 2.1 Bigger Servo Whole Update 11/28/16 Rev 2: I'Ve Made The Servo Mount More Narrow So We Do Not Lose As Much Travel On The X Axis, I Had To Trim It To Fit The Servo. So I Will Be Making The Servo Hole A Bit Bigger So It Will Fit Better. I Made My Own Servo Arm. Because I Could Not Find One That Was Long Enough. It Not Perfect. I'M Test Printing Today Update 11/26/16: I Plan On Making A Duct That Circles The Hot End. I Also Plan On Making Extended Ducts For The E3D Volcano. Let Me Know In Comments If You Want That. Also Working On A 3 Mm Screw Version I Liked Tech2C Version But I Like Servo Auto Level. So I Remixed It. Clamp Made By Tech2C I Just Put It Here So Its All In One Spot 0.2 Layer Height 0.2 First Layer No Support 2 Walls 0.8 Mm Thank You Tech2C Http://Www.Thingiverse.Com/Thing:1632847
Statistics
Likes
58
Downloads
0