3D printed Slackline Spacer
Description
* 4 Pieces Are Required For Each Ratchet. * Easy To Mount And Dismount, No Screws Are Required. * Try To Center As Much As Possible The Line Before Put Tension. The Spacers Help To Keep The Line Aligned But Excessive Misalignment Can Damage The Pieces And The Line. * There Are 2 Models. Xxl Is For Large Ratchets And Regular For All The Others. Choose The Size That Fit Better To Your Ratchet, And Never Use Them If The Printed Pice Is Touching The Break Of The Ratchet. * There Are Several Files For Each Model. The Push Fit Is Adjusted For Printers With 0.4 And 0.3 Mm. I Get The Best Results With 0.3Mm Adjustment. Sand Paper Can Be Required. * Regular Model Have Not Been Tested. * If You Have Problems The .Sldprt Files Can Be Edited For Adjust The Tolerances Of Your Printer. * Tip The Designer If You Think That This Product Is Useful And Help Me To Make New Designs.
Statistics
Likes
8
Downloads
0