Laser Cutted Slackline Spacer
Description
* Cut From 3Mm Mdf * Dxf Format Is Recomended * Test How The Pices Fit Before Cut All Of Them. * For 1 Ratchet Are Required: 4X M2_Small (Closest To The Sides) 12X M2_Big * If You Find This Design Useful, Tip The Designer. * If You Don'T Have The Tools For Design This But You Need It,Message Me. * Never Use Them If The Printed Pice Is Touching The Break Of The Ratchet.
Statistics
Likes
5
Downloads
0