Partitions (For LED/Pixel display)

Description

I Don'T Especially Enjoy The Idea Of Soldering 225 Leds Together To Make A Display, So Here Is A Simple Solution That I Used To Avoid Cutting And Soldering These Lights. This Is A Minimal System With Two Parts That Combine To Make Sturdy Plastic Cubicles For Your Diy Led Display. These Partitions Are Spaced For The 30 Leds/Meter Strips Such As The Ws281** Sold As Neopixels Or Similar. The Ones That I Used For This Project Were The Waterproof Type That Have A Sticky Back. Ip65? I Printed My Partitions Out 5 At A Time Without A Raft And 30% Infill. Depending On The Opacity Of Your Filament, You May Want To Adjust This Accordingly. The Partitions Came Out A Little Warped So I Made The Corner Connector Piece To Stabilize The Structure For Mounting. I Think Those Who Print With Rafts Or Different Printers Might Not Need As Many Of These Corner Things; I Used About 25.

Statistics

Category

Tags