E3D Chimera / Cyclope Dirct drive
Description
________________________________________________________________________ ********* An Updated Ver Will Be Added In Next Few Days ********* Changes Will Be Made To Top Part Only, With Thicker Motor Mount And Added Hinged Mount For A 40Mm Motor Cooling Fan With Block Supports. ________________________________________________________________________ Direct Drive Chimera Or Cyclops Mount With Radial Fan Part Cooling Use 5 Mm Threads Plastic Screws To Assemble Bottom And Top Together ( I Used Screws That I Recycled From Taking Apart Old Tv'S They Are The Black Screws That Normally Hold The Back Covers).Use Either M5 Or 10/24 Screws To Attach The Hotend Mount To X Carriage There Is No Nut Trap As The Screws Bite Firmly In To The Plastic. If You Have A Problem I Could Add One. I Design To Use With Mk8 Direct Drive Motors Cold End Found Here Http://Www.Thingiverse.Com/Thing:111711. My E Step At 1/16 Micro Stepping Is 157.01 The X Carriage And Radial Fan Duct Was Made By Prusa Research, I Only Modified It To Fit My Screws. ***** Updates ***** Also See Add-Ons For This Extruder Here New Parts Cooling Fan Https://Www.Thingiverse.Com/Thing:2998675 Pen Plotter Add-On Https://Www.Thingiverse.Com/Thing:3275336
Statistics
Likes
29
Downloads
0