Ultimaker Alu bed with 3-point bed leveling (package)

Description

As I Got A Nice Alu Sheet I Decided To Build A New Print Bed Out Of It, Incorporating A Nice, Nearly Plug-In 3-Point Bed Leveling. Here I Gathered All Needed Informtion/Parts As A Package: - Alu Bed: Dimensions And Positions For M3 Threads Can Be Found In The Pdf - Replacement Parts For Front Bed Mount As Direct Plug-In Replacement - Rear Bed Mount Parts (Need To Drill 3 Holes In The Plywood) - Bed Washers From Http://Www.Thingiverse.Com/Thing:22448 - M3 Screw Knob From Http://Www.Thingiverse.Com/Thing:225286 Further You Need: - 3 Pc. Original Bed Springs - 3 Pc. M3X40 Mm Screws Or Threaded Rods - 6 Pc. M3X10Mm Screws - 9 Pc. M3 Nuts - Glass Plate 242X242, Thickness As You Like, 2Mm Recommended - 2Pc. Bulldog Clamp - 3Mm Drill For Cleaning The Guiding Holes As I Finished Replacing My Acrylic Bed, I'M Absolutely Glad With This Setup As It Needs Not Too Much Space, Less Modification On The Original Parts And Gives A Very Smooth And Easy Leveling. Next Will Be To Add A Silicon Heater Pad To Get A Heated Bed

Statistics

Category

Tags