Enclosure for new SMD-based geiger counter by impexeris for SBM20 and STS-5 tubes
Description
--- Update 2020-02-01 I Have Added A Cap For Sbm-20M (Shorter Tubes) Adapterm-Sbm-20.Stl This Is A Revised Enclosure For The New - Smd Based Hardware Version Of The Diy Geiger Counter ( Http://Www.Ebay.Com/Itm/162282227238?Sspagename=Strk:Meselx:It&_Trksid=P3984.M1555.L2649 And Https://Github.Com/Impexeris/Diy-Arduino-Geiger-Counter-Smd/Tree/Master/Enclosure%20.Files%20For%203D%20Printing ) By My Colleague - Ebay Vendor Impexeris ( Http://Www.Ebay.Com/Usr/Impexeris) . Note: This Enclosure Is Originally For Sbm-20 Geiger Müller Tube. If You Have An Sts-5 (Ctc-5) Tube Print Top-For-Sts-5-Geiger-Tube.Stl Bottom-For-Sts-5-Geiger-Tube.Stl Files. Sts-5 Is Very Similar To Sbm-20 But It Is 2 Mm Longer. Https://Youtu.Be/God-Lsd_Pks This Enclosure Is For Use With Sbm-20 Or Ctc-5 Geiger Tubes. Besides Adjusted Geometry For Lcd / Buzzer / Led, Ir Receiver Power Switch And Push-Buttons New Features Of The Enclosure Are: - Additional Opening For For The "Click/Tone" Switch - Additional Opening For For The "Tone" Button - Additional Opening For Serial Header Access (This Opening Is Semi Closed So If It Is Needed, It Can Easily Be Cut-Open) - Now The Lcd Rests On The Support Pins Which Direct The Display More Precisely To Its Place. - Whole Device Snaps In And Is Held By Springy-Clips - Battery Is Kept In Place By Springy-Clips - Screw Holes And Columns Are Introduced To Allow Bottom Cover To Be Securely Held By Two ∅2Mm Diameter/10Mm Long Screws (∅4Mm Head Diameter) If You Found My Design Useful Or Inspiring And Would Like To Buy Me A Cup Of Espresso You Are Welcome To Tip Me: Https://Www.Paypal.Com/Cgi-Bin/Webscr?Cmd=_S-Xclick&Hosted_Button_Id=U25V96Gznvl3N&Source=Url Thank You!
Statistics
Likes
48
Downloads
0