RAMPS 1.4 and Arduino Mega 2560 Mount for 25mm 8020 Extruded Aluminum
Description
<B>Update:</B> See [This Thing](Http://Www.Thingiverse.Com/Thing:2138001) For A Variation Of This Arduino And Ramps Mount That Hangs An Lcd Display Vertically From The Extruded Aluminum, And Allows The Arduino And Ramps To Be Mounted Directly To The Backplate. Simple Ramps 1.4 Mount For 25Mm 8020 Aluminum Extrusion. Mounts To Arduino Mega 2560 And Ramps, Which I Bought Together On [Amazon In This 3D Printer Electronics Kit](Https://Www.Amazon.Com/Osoyoo-Printer-Controller-Stepper-Heatsink/Dp/B0111Zss2O/Ref=As_Li_Ss_Tl?_Encoding=Utf8&Psc=1&Refrid=D5Yc120S9Ma68939Cpsx&Linkcode=Sl1&Tag=Adamcf-20&Linkid=1C05Efa44Ec9B0A821E7D8D7837Aed6C). Keeps All Electronic Connections Exposed For Easy Access And Good Cooling Of Stepper Drivers. Also, Mount Is Angled To Conveniently Hide The Ramps Board Behind A Mounted Full Graphics Lcd Display (See Picture Of Lcd With Ramps Behind It). [Here Is The Link To That Lcd Case And Mount](Http://Www.Thingiverse.Com/Thing:1926631). <B>Required Hardware</B> - 3 M3X25Mm (Minimum) Screws - 3 Each M3 Nuts And Washers - 2 Each M6 Washers, T-Nuts, And Bolts (Length May Vary Depending On Your Set Up, I Used 12Mm Long Bolts, The 3D Printed Mount Is 4Mm Thick At Bolt Holes) Note: All 4 Holes For The Arduino Are Printed In The Mount, However Only 3 Are Accessible With The Ramps Board Installed. <Script Src="//Z-Na.Amazon-Adsystem.Com/Widgets/Onejs?Marketplace=Us&Adinstanceid=330C4Efd-C429-4176-9E2E-D3F4862F1D22"></Script>
Statistics
Likes
31
Downloads
0