Tevo X-Axis Base-Plate + Fan-Duct
Description
I Made This Thing, Because The Standard Sled Overhangs So Much. In My Version The Hot-End Is As Near To The 2040-Profile As Possible. To Achieve That, I Had To Extend The Base Plate From From 7Cm To 9Cm, To Fit The Hot-End Between The Two Front-Rolls. So Please Notice: You Will Lose 2Cm Of Workspace In The X-Axis! (1Cm At Each Side) The Longer Sled Makes It Also More Stable And Less Wobbly, Which Is Quite Nice. There Are Two Versions Of This. The First (X_Sled (Base+Fanduct).Stl) Is One Stl With The Base Plate And The Fan-Duct Combined. The Second Version Is X_Sled_Base.Stl And X_Sled_Fan-Duct.Stl Seperatly. Version 1 Is Most Likely A Lot Sturdier, But Version 2 Is Easier To Print. For Version 2 You Nead Two M3-Screws To Connect The Fan-Duct With The Base-Plate.
Statistics
Likes
20
Downloads
0