Xena S Chakram v2
Description
This Is An Update To My Previous Design - Http://Www.Thingiverse.Com/Thing:1712732 Per A Request I Received. Was Asked To Split The S Chakram Into 2 Halves And Enable Magnets To Be Added To Hold The 2 Halves Together. There Are 4 Pieces To Print. Glue The 2 Halves Together And There Should Be 4 Pockets To Glue In Rare Earth Magnets - 4 Mm Diameter X 2.5 Mm Height On Each Side. Glue Magnets Into These Pockets And After The Glue Cures, Attach The 2 Halves Together. I Modeled The Magnet Pockets To Accommodate These Magnets - Http://Www.Harborfreight.Com/10-Piece-Rare-Earth-Magnets-67488.Html I Have Not Printed This, Nor Do I Immediately Plan To, So Please Share Your Results. If You Want To See Any Updates Or Fixes That Are Needed, Please Let Me Know. If Anyone Wants Me To Split These 2 Halves Into Further Halves So They Can Fit On A 150 Mm X 150 Mm Print Bed, Please Let Me Know. Update 4/21/18 It Was Brought To My Attention That 1 Of The Pieces Was A Duplicate Rather Than A Mirror Image. I Have Now Fixed That Problem As Well As Replaced All 4 Files With Higher Quality Stls.
Statistics
Likes
68
Downloads
0