Arduino Mega 2560 and Due adapter plate for Prusa i3 Improved laser cut frame + VIDEO
Description
Basically The Holes On The Left Wing Of The [Prusa I3 Improved For Laser Cut](Http://Www.Thingiverse.Com/Thing:39889) Do Not Match Up With The Arduino Mega 2560 And Arduino Due. Right Now I Only Use The Upper Most Right Hole To Mount My Arduino Due And Ramps-Fd Shield. I Took Measurement On My Own Frame And From The .Dxf File Of The Frame And They Match Up. Then I Found The Measurements On A [Blog](Https://Circuitsville.Wordpress.Com/2015/06/07/An-Idea-For-Arduino-Shield-Starters/) For The Holes Of The Arduino Mega / Due. In Fusion 360 I Made A Sketch Of The Hole Locations And Drew Lines Around Them To Make A Body. Afterwards I Decided To Save On Print Time And Filament By Splitting The Body Into Upper And Lower Mounts. [You Are Free Too Download And Modify. Get The Source From Autodesk Gallery.](Https://Gallery.Autodesk.Com/Fusion360/Projects/Arduino-Mega-2560-And-Due-Mount-For-Prusa-I3-Improved-Laser-Cut-Frame) Using Netfabb Standard I Checked The Stl Files For Problems. Glad To Say There Aren'T Any. :) Requires M3 Hardware (7 Bolts, 7 Nuts And Washers), Preferably Stainless Steel, Otherwise It Should Be Fine Too. Subcribe To My Youtube. You Can See This Thing Getting Printed [Here](Https://Www.Youtube.Com/Watch?V=Uwsmk12Q5Xg).With A Little Bit Of A Fusion 360 Peek ;).
Statistics
Likes
4
Downloads
0