MPCNC F Z motor plate with bolts
Description
This Is A Modified Version Of The Mpcnc Z Motor Plate (Model F 25Mm). The Reason I Modified It Was That My Original F-Z Motor Plate Even When Tightened Down, Slide Off. So I Thought Why Shouldn'T It Be Secured To The Z Pipes Like The Spindle/Etc'S Are? So Using Openscad I Imported The Original Model, Sliced It Into 3 Parts, Stretched The Middle Part, Then Put Them Back Together (That Was My Version One, Not Posted Here), But That Covered Up More Of The Motor Shaft So I Couldn'T Access The Screws To The Coupler. So I Carved A Bit Out Of The Side Around The Motor Back To Approx Size It Was Originally, But Still Leaving A Thicker Area Around The Shafts. I Also Removed From The Thicker Design A M4 Hole And M4 Nut Shape For The Bolt To Go Through. Neesd 2 X M4 X 50Mm I Even Left The Original F Marking On The Design. You Should Be Able To Use This Script To Change The Object For The C And J Versions, But Since I Don'T Have Anything To Test Them On, I Haven'T Designed For Them. The Original Creator Is Welcome To Take This Mod And Fold It Back Into The Original Design. Original F Z Motor Plate Stl Included In This So That He Scripts Works. I Know If Quick Openscad Render It Looks Bad, But Redo It Full Render (For Stl Export) And It Works.
Statistics
Likes
8
Downloads
0