Prusa i3 Steel Extended Y-Axis motor mount
Description
The Existing Steel Plate Motor Mount On My Prusa I3 Steel Had The Motor Shaft About 25Mm In Front Of The Rear Steel Pate. As A Result I Lost About 25 - 30Mm Of Usable Print Area. This Mount Is Designed To Replace The Two Steel Plates Provided. The 3Mm Screws Use The Existing Bracket Mount Holes In The Rear Plate And The Motor Sits Flush Against The Inside Of The Rear Plate. Other Parts Designed For My Printers Include: - Http://Www.Thingiverse.Com/Thing:1959901 (Gt2 Belt Clamp (Prusa Y-Axis) - Http://Www.Thingiverse.Com/Thing:1937232 (Arduino Mega And Ramps V1.4 Case) - Http://Www.Thingiverse.Com/Thing:1905409 (Prusa I3 Steel 10Mm Upgrade) - Http://Www.Thingiverse.Com/Thing:1959974 (Prusa I3 Steel Y-Axis Motor Mount) - Http://Www.Thingiverse.Com/Thing:1991116 (Prusa I3 Steel X-Carriage) - Http://Www.Thingiverse.Com/Thing:1991117 (E3D Chimera / Cyclops Mount) - Http://Www.Thingiverse.Com/Thing:1994413 (Dual E3D Thermocouple Amplifier Board - Housing) - Http://Www.Thingiverse.Com/Thing:1090661 (Belt Driven Bowden Extruder With 1:2.5 Reduction) - Http://Www.Thingiverse.Com/Thing:896676 (Enclosure For Sevenswitch Fet) - Http://Www.Thingiverse.Com/Thing:922455 (8Mm Z-Axis Leadscrew Bearing Holder) - Http://Www.Thingiverse.Com/Thing:922309 (Z-Axis Nema 17 Adjustable Endstop Bracket) - Http://Www.Thingiverse.Com/Thing:899607 (Cable Chain) - Https://Www.Thingiverse.Com/Thing:2334269 (Lcd Housing) - Https://Www.Thingiverse.Com/Thing:2377049 (Psu Cover) - Https://Www.Thingiverse.Com/Thing:2395715 (Chimera & Zesty Nimble Drive Cable Spacer) - Https://Www.Thingiverse.Com/Thing:2407651 (Chimera Zesty Nimble X-Axis Set For I3 Clone) - Https://Www.Thingiverse.Com/Thing:2436869 (A Dummy Nema 17 Motor To Hold The 5Mm Shaft) - Https://Www.Thingiverse.Com/Thing:2748978 (A Duet Wifi Housing) - Https://Www.Thingiverse.Com/Thing:2749324 (A Layer Fan For The Smart Effector) - Https://Www.Thingiverse.Com/Thing:2814068 (A Sannce I21Ag Mount For 3D Printers) - Https://Www.Thingiverse.Com/Thing:2844881 (A Cooling Duct For A Noctua 40Mm Fan On A Duet Smart Effector) - Https://Www.Thingiverse.Com/Thing:2846955 (A Quiet Berdair Type Pump Mount) - Https://Www.Thingiverse.Com/Thing:3333609 (A Raspberry Pi Case With 40Mm Fan) For Avoidance Of Doubt, This Item Is Licensed Under A Creative Commons Attribution-Noncommercial-Sharealike 4.0 International License. See Http://Creativecommons.Org/Licenses/By-Nc-Sa/4.0/ For More Details.
Statistics
Likes
14
Downloads
0