65mm Spindle Dust Shoe
Description
A Dust Show For A 65Mm Spindle (Typically, The Water Cooled Chinese Spindles). The Design Of The Vac Hose Is To Accommodate A Smaller Vac Such As This One: Http://Www.Homedepot.Com/P/Stinger-2-5-Gal-1-75-Peak-Hp-Compact-Wet-Dry-Vac-Wd2025/100021998 The Vac Hose Is Just A Tapered Fit And Should Be Snug And Tight. Included In The Dust Head Are Two Holes For 3Mm Leds. I Also Used Some Silver Reflective Tape To Increase The Available Illumination Into The Dust Shoe. You'Ll Need To Print With Supports And Do A Little Clean-Up But It Seems To Work Well. Design Is In Onshape: Https://Cad.Onshape.Com/Documents/E56913D3Cb4D53558C956869/W/A55F9583Ffce0D31E9E8311E/E/61E74E1439A6A251F1899F92
Statistics
Likes
7
Downloads
0