Direct Geared Belted Extruder V2 - 1,75mm
Description
<H3>Direct Geared Belted Extruder V2 - For 1,75Mm</H3> If You Are Looking For A Bowden Version, You Should Go See My <A Href="Http://Www.Thingiverse.Com/Thing:1764551" Target="_Blank">Belted Extruder V.3 For 1.75</A> Instead. <H4>Changes From V1</H4> Rotated The Extruder 90 Degrees To Face Forward Instead Of To The Left. Some User Have Had Problems With The Left Facing Model Hitting Z-Rods Etc. I Made Spacers For That Eventuality, But V2 Eleminates This Issue. <H4>New X-Carriage For V2</H4> You Are Going To Need My Remixed <A Href="Http://Www.Thingiverse.Com/Thing:1966867" Target="_Blank">X-Carriage For Direct Geared Belted Extruder V2</A> For This Extruder. It Is Listed Seperately As It Is A Remix And Thus Have Different Licens On It. Photos Shows The X-Carriage Mouted On The Extruder. <H5>Key Features</H5> <Ul><Li>Compact Highly Accurate, Easy To Use And -Install Direct Geared Geared Belted Extruder For All 1,75Mm Filaments.</Li> <Li>Gearings 1:3.75</Li> <Li>Weight <I>Including Motor</I>: 320G - This Is Including Motor, All Gears, Belt, Screws, Nuts Etc.. <Br>Please Note That A Standard Normal Nema 17 Weights 290G In Itself, So 320G Is Very Light</Li> <Li>Only Quality Items Used For Longelevity And Better Accuracy.</Li> <Li>No Exotic, Hard To Find Expensive Parts Used.</Li> <Li>Set And Forget Idler System - Try It! :)</Li> <Li>Prusa Compatible Mount Hole Spacing.</Li> <Li>Silent Running Due To Belt Operation.</Li> <Li>Mount Holes For Optional Usage Of Expansions.</Li> </Ul> <H5>Expansions Options</H5> <Ul><Li>Option To Mount Sensors Or Other Expansion Behind Hotend. <Li>Cooling Solution Can Be Mounted On Expansion Slots Instead Of On Hotend</Li> <Li>Opton To Mount Cable Management, Motor-Cover, Fans And Other Expansions Next To Motor.</Li> </Li>Lids Or Decoration For Motors, Etc</Li> </Ul> <H4>Usage Requirment</H4> While This Direct-Drive Belted Extruder 1,75Mm (V2) Has Standard Hole Mount Spacing Of 23Mm Center To Center Of The Mount Holes, And You Most Likely Can Use It As It Is, I Recommend You Do One Of The Following, Where The First Is The Preferred Option: <Ol><Li>Use My Modified <A Href="Http://Www.Thingiverse.Com/Thing:1966867" Target="_Blank">X-Carriage For Direct Geared Belted Extruder V2</A>.</Li> <Li>Remove 1-2Mm Of The Top-Center Of Your Existing Carriage.</Li> <Li>Use Spacer-Plate/S To Put Between Your Existing Carriage And The Extruder.</Li> </Ol> <H4>Buy One?</H4> I Am Selling These. Also Just The Metal Parts. Drop Me A Message If Interested. I Live In Denmark And Can Ship For Dkkr 35 In Denmark, But Let Me Know Where You Live, And We'Ll See. <H4>3D Model And Files?</H4> I Do Not Offer Up The Extruder In Other Fileformats Than Stl, But You Can <A Href="Http://A360.Co/2Gh5Nm4" Target="_Blank">See The Model</A> On Myhub On Autodesk'S Servers.
Statistics
Likes
48
Downloads
0