Mr Coffee Espresso Machine Handle
Description
This Is A Replacement Handle For The Carafe That Comes With The Mr. Coffee Brand Espresso Machine Model Shown In The Included Pictures(They Have Changed The Design Several Times Over The Years, So Make Sure You Have The Same Model). It Was Designed To Re-Use The Metal Band And Screw, By Removing What Remains Of The Old Plastic Handle, And Installing The New Model Instead. Pass The Screw Through The Hole In The New Handle, And Into The Metal Box On The Band. The Box Should Tighten Up Into The Recess In The Handle, For A Snug Fit. It Has Been A While Since I Actually Printed This Out, I'M Just Now Getting Around To Uploading It, So I Do Not Recall The Print Settings I Used. There Were Supports Involved, And I May Have Rotated The Model Upside Down... I Finished The Surface With Acetone For A Less Than Perfect, But Functional End Product. If Yours Turns Out Better, Please Post Your Print Settings For Anyone Else Who Just So Happens To Need A New Handle For A Mr. Coffee Espresso Maker.
Statistics
Likes
0
Downloads
0