Odroid X2 - 3D Case - hardkernel.com
Description
3D Case For The Odroid-X2 Board. = Including: 1X Base_Box.Stl & Base_Box.Sldprt 1X Base_Top.Stl & Base_Top.Sldprt 1X Odroid-X2.Sldprt 1Xodroid-X2-Inbox.Sldasm Instructions: Please Use The .Stl Files To Print For Your 3D Printer. Please Print One By One, And Change The Orientation Of The File, To Suit Your 3D Printer (Recommend: Largest Flat Area As Base) Once Printed, You Will Need 8X M3 Screws(Both Self Tapper & Blots Style Will Work). These Are Used To Hold Both The Odroid-X2 In Place, And The Top_Box Part On. Reason: This Came About After Looking On Thingiverse For Something Like This, And Found There Wasn'T Much Variation, And That The Only One On Thingiverse (Spring 2014) Was Slightly Limited. Copyright: I Am Publish This And An Open-Hardware Design, Hence Why We Have Releasing Our Soildworks 2012 3D Mock Up Parts. [Designed By Ape Systems] Please Feel Free To Uses And Redesign At Your Leisure. Please Also Link Back To This Post When Ever To Redesign Or Make This Design. Ape Systems Hope You Enjoy This Part And... "Go Ape!"
Statistics
Likes
6
Downloads
0