Z rod cap for Anet A6
Description
This Z Axis Cap Is Hollow Toward The Top To Allow Your Z Threaded Rod To Extend Above Your Printer Frame. During Assembly, I Made Sure That My Z Rod Had A Gap Between It And The Z Axis Stepper Motors To Prevent Any Undesirable Artifacts. A Pair Of These Caps Ensures That You Have The Necessary Gap For Isolation. This Is A Tight Fit. I Placed Lubricant In The Cap And Manually Moved The Z Rods To Ensure It Turned Freely Before First Use. I Brought The Z Axis Up To About Half Way Up The Printer. I Then Loosened And Re-Tightened The Grub Screws Connecting The Z Rods To Make Sure That The Rods Were As Aligned As Possible. Again Make Sure You Leave An Ample Gap Between The Z-Stepper Motors And The Z Rods.
Statistics
Likes
554
Downloads
0