Woolly Mammoth Skeleton
Description
Update 15-Feb-2017: I Updated The Two Base Parts To The Correct Versions With Holes For The Feet Pins. See "Wmammoth_Base1_V3.Stl" And "Wmammoth_Base2_V3.Stl". ______ Update 26-Dec-2016: I Updated The Four "Feet" Models To The Correct V3 Version. The Previous Ones Were Missing The Connector Pins To Snap Into The Base Parts. I Also Updated The Pelvis-Spine-Skull Pins Model To Be A Smaller File Size, But You Will Need To Print Three Of Them, Hence The "X3" In The File Name.. ______ The Source File For This Model Is The 3D Scan Of A Woolly Mammoth Skeleton From The Smithsonian Institution National Museum Of Natural History Site At: Http://Www.3D.Si.Edu The Scale Of The .Stl Files Is 1:10. I Separated The Original Model Into Printable Pieces And Added Snap Together Features To Make It Easier To Assemble. I Also Added A Two-Piece To Make The Assembled Model Stand Properly And Improve Strength. The Model In The Pictures Did Not Have Snap Features So Gluing It Together Was Difficult. I Have Not Tested All Of The Snap Fits, So Please Let Me Know Of Any Issues If You Build It. The Model In The Photos Was Printed At 75% Scale To Fit The 205Mm Square Bed Of My Printer. This Makes The Final Scale Of The Model In The Pictures 1:13. The Height Of The Assembled Model Is Approximately 350Mm (13.8"), Or At The 75% Scale To Fit Most Printers The Height Is Approximately 260Mm (10.3")..
Statistics
Likes
1278
Downloads
0