Bowling Trophy
Description
1. Printing 2. Sanding With Sand Paper 3. Spraying With Filler 3. Wet Sanding With Sand Paper 4. Painting 5. Bonding Together, All Parts I Glued Together With Z-Poxy (Resin Glue) 6. Varnishing For Better Feel Of The Weight, Is Filled With Gypsum Printin Time About 40 Hours With 0.2 Weight About 1,5Kg Hight 366Mm Bottom Stand: Infill 20%, No Supports And Next Infill Abouth 100G Gypsum, Main Stand: Print Whitout Bottom And Infill 5%, No Supports And Next Infill Abouth 900G Gypsum Pin: Infill 30%, No Supports Ball: Infill 30%, Yes Supports Medail: Infill 20% No Supports Words: Infill 100%, No Supports
Statistics
Likes
32
Downloads
0