Mtech Xtreme MTX-8144 Knife Sheath
Description
Tips In Any Amount Are Appreciated: Https://Www.Paypal.Me/Satgod My Aunt Got Me The Mtx-8144 For X-Mas. Its Not My Microtek Double Edge Kbar But Its A Nice Gift. As Soon As I Got Home I Honed The Edge To A Razor As I Do With All My Knifes And Lets Just Say That That Nylon Sheath Didnt Last But About 4 Draws And It Was Done So I Went To My Computer And Did A Fast Cad Of This I Did A Fast Print .5 Res Using Petg For Proof Of Concept, Cleaned Up A Few Things, Decreased The Thickness By About 3.5-4Mm Overall And Here It Is For Anyone Needing One I Have A Set Of Sides For Left Hand And Right Hand And They Are Labeled As Such I Prefer A Scout Sheath For This Type Of Knife So Its Setup That Way But There Is An Adapter With It. Just Print The Adapter, Slide It Thru The Loops And Its A Standard Belt Carry As Well I Tried To Make This As Easy As Possible For Anyone To Print That Is Why Its In Parts, If Not Supports Would Have Been Needed Print The Parts And Glue It Together, If You Use Petg Any Acrylic Glue Will Work I Use "16 Fast Set" By Ips For Petg I Do Consider This A Work In Progress As I Will Be Cutting The Edges Down, Tweaking It And Finally Adding A Graphic To The Top Of The Sheath For A Nice Finish Product Look Enjoy Tips In Any Amount Are Appreciated: Https://Www.Paypal.Me/Satgod
Statistics
Likes
10
Downloads
0