3DP Model Rocket Launch Pad w/ Adjustable Leg
Description
A 3D Printed Model Rocket Launch Pad Built To Last! With An Adjustable Leg For Leveling And/Or Aiming Your Rocket Into The Wind. Designed For Use With Standard 1/8" Or 3/16" (Maxi) Sized Rod For Fun With All Sized Rockets. Very Little Hardware Will Be Required To Finish This Launch Pad.* Bom- A)1X- 1/8" X 24" Rod B)1X- 3/16" X 48" Rod (Optional) C)1X- 1/4" Keyless Chuck D)2X- 1/4-20 X 1" Bolt (Hex Or Allen Cap) E)1X- 1/4" Id Nylon Washer F)1X- 1/4-20 Nylon Insert Lock-Nut G)1X- 3Mm X 0.5Mm X 20Mm Bolt (Hex Or Allen Cap) H)1X- 1/2" Od Toothed Lock-Washer (Min. 3Mm Id) I)1X- 1/2" Od Fender Washer (Min. 3Mm Id) J)1X- 3Mm X 0.5Mm Wing-Nut K)1X- Large Tin Can Lid (Coffee Cans Size Ideal) L)3X- 1/4-20 X 3 1/2" Bolt (Hex Or Allen Cap) (Optional)** M)3X- 1/4-20 Nylon Insert Lock-Nut (Optional)** N)3X- 1/4" Id Split-Lock Washer (Optional)** O)3X- 1/4" Id Flat Washer (Optional)** *Note- Print "Main Leg" Twice. **Note- Optional Hardware For Bolting Launch Pad Together, Otherwise The Launch Pad Snaps Together And May Be Glued For Permanent Installation.
Statistics
Likes
4
Downloads
0