Mini P6*6 Pinhole Camera Keyring
Description
I Made This From The Original Source Files For The P6*6 120 Film Pinhole Camera. It Is Scaled At 25% Of Actual Size And I'Ll Be Handing Them Out As Give-Away Swag At The 2014 Seattle Mini Maker Faire, March 23 & 23, 2014. If You Look Closely At The Prints, You Can Discern The Tiny Knurling At The Sides And On The Shutter Extension! Some Concessions Have Been Made To Print This So Small: - First, All Interior Voids Have Been Filled - Sadly, It Won'T Make Photographic Exposures! - The Rear Surface Has Been Sliced Flush To Facilitate Printing In One Piece With A Minimum Of Support. (This Is The First Design I Have Ever Published That Really Requires Support To Print Properly.) - There Is A Hole That Pierces The Mini P6*6, So That You Can Look At The World Through A "Pinhole" ...Albeit A Large Pinhole. While It Won'T Actually Take Pictures, I Made A Picture Through It: Http://Www.Flickr.Com/Photos/Theschlem/12706444613/ - No Moving Parts For The Ultimate In Reliability! - Lastly, There Is A Handy Keyring Attachment Loop, So That You Will Always Have A Pinhole Camera At The Ready! Indeed, You Can Shoot Photos Through The "Pinhole" (See The Vignette Of My Toes). I Added The Knurled Surface Library V2 By Aubenc As A Source. Pardon The Oversight. ___ **Attention** This Work Is Licensed Under The [Creative Commons - Attribution - Non-Commercial License](Http://Creativecommons.Org/Licenses/By-Nc/3.0/). This License Applies Only To The Files And Documents Available For Download From The **Thing Files** Section Of This Thing. **All Other Related Content (Photographs, Videos, And Verbiage Such As Contained In "Description" Or "Instructions" ) Are Excluded From This License. With All Rights Reserved, Unless Specifically Available For Download** This Notice Constitutes A Clarification, Not A Change, To Licensing For This Design.
Statistics
Likes
145
Downloads
0