DSLR Shoulder Rig
Description
This Parts-Pack Is In Wip State. Files May Change Without Notice. Part List For The Basic Configuration You Will Need: Clamp_2Level (2X) - Clamps Secondary Rods To The Primary Ones. Clamp_Basic (Xx) - Basic Clamp, Every Other Clamp In This Design Is Based Around This. Clamp_Camerapad (2X) - Used For Clamping The Camera Pad To The Secondary Aluminium Rods. Clamp_Ring (2X) - Main Clamps, Used For Clamping The Secondary, Tertiary, Quaternary And Quinary Rods. It'S The Biggest Part In This Design, So I Made A Version That Is Cut In The Middle (Clamp_Ring_Half.Stl). Mount_Camerapad (1X) - Used For Mounting The Camera To The Clamp_Camerapad. Mount_Followfocus (1X) - Used For Mounting The Motor For The Focus Control. Tensioner_Followfocus (1X) - Used To Tighten The Drivebelt. 3 Meter Long, 15Mm Wide Aluminium Rods And A Bunch Of M6 Hex Nuts And Bolts. Image Description: (Rods.Png) Rods: Red - Primary Rods, They Lengh 510Mm, Used To Mount The Shoulder Pad (Not Designed Yet). Green - Secondary Rods, They Lengh 250Mm, Used To Mount The Camera Pad. Blue - Tertiary Rods, They Lengh 190Mm, They'Re Unused At This Point Of Designing, So You Don'T Need To Cut Them. Yellow - Quaternary Rods, They Lengh 190Mm, Used To Mount The Followfocus Motor And The Tensioner. White - Quinary Rods, They Lengh 220Mm, Used To Mount The Shotgun Mic With A Clamp_Basic. Clamps: Light Grey - These Are Double Level Clamps (Clamp_2Level.Stl). Black - These Are The Ring Shaped Clamps (Clamp_Ring.Stl).
Statistics
Likes
37
Downloads
0