Print-Rite DIY LCD Screen Case
Description
This Is A Case For The Hobbyking Print-Rite Diy Lcd Screen (Https://Hobbyking.Com/En_Us/Print-Rite-Diy-3D-Printer-Lcd-Panel-Without-Casing.Html) It Can Be Used For Other Lcd Screens Of The The Same Size, Depending On Where The Board For The Potentiometer Is You Will Need The Spacers, If You Are Printing This For The Print-Rite You Will Need 3 Of The Spacers. You Will Need 4 M4 8Mm Countersunk Screws, 4 M3 15Mm Screws And 4 Rubber Feet For The Bottom To Help It Grip
Statistics
Likes
19
Downloads
0