RC Sport Cockpit set
Description
A Sport "Scale" Cockpit Set For An Rc Plane. Pilot, Seat And A Small Dashboard - Something To Fill The Canopy! The Pilot Needs To Be Printed With Supports For The Overhang On The Mask - I Found That The Standard Supports In Cura Worked Fine, For All Sizes From 25Mm Height Upwards. Update: I Was Messaged Asking What Scale This Model Is, And How To Adjust For Different Scales, So Have Copied The Response Here For Anyone Else That Might Need It: This Model Is Very Approximate 1/11Th Scale Pilot The Way I Work Out The Scale Of The Mode Is To Simply Divide The Real Scale Wingspan By Your Model'S Wingspan (Using The Same Units) E.G Mustang Wingspan = 37Ft = 11277 Mm. Divide This By Your Model'S Wingspan: 11277/1100 = 10.25. So You Need A 1/10Th Scale Pilot. This One Is Approximately 11% Scale, So In Your Slicer You Can Rescale As Follows (All Figures Are Very Much Estimations!): 1/7Th Scale Pilot = 170% Enlargement Of This 1/8Th Scale Pilot = 150% Enlargement Of This 1/9Th Scale Pilot = 130% Enlargement Of This 1/10Th Scale Pilot = 115% Enlargement Of This 1/11Th Scale Pilot = No Scaling Required 1/12Th Scale Pilot = 98% Reduction Of This
Statistics
Likes
211
Downloads
0