Anet A8 - External lcd enclosure v3.2

Anet A8 - External lcd enclosure v3.2

Description

External Case For The Lcd Module With Buttons Of The Anet A8. Print The Files At The Layer Height You Want, At 0.28 Infill 5% It Needs Nearly 4 Hours For The Front And Nearly 1 Hour For The Supports. V3.2: - Added A No Text Alternative For The Front Piece V3.1: - Added An Alternative Pair Of Supports Without Screw Holes For The Base But With Flat Rails 49.5X20Mm That You Can Use To Stick The Support To A Rigid Surface With Double-Sided Tape. V3.0: - Added A Rear Panel With 3Mm Screws Supports For The Ones Which Plan To Mount In On Top Of Some Printer Enclosure. - Added Holes For Fixing It In The 45° Supports. - Added Holes For Screws In The Supports. They Can Be Hided Inside The Enclosure Or You Can Left Them On The Outside For Better Maintenance. V2.0: - Enlarged Holes For Nuts (+0.4Mm) In The Supports. - Enlarged Holes For Push Button (+0.4Mm) As Someone Had Some Trouble Inserting The Plastic Buttons In The Holes (It May Vary Slightly Depending On The Precision Of The Chinese Who Soldered The Buttons In Place). - Made The Front Plate Thinner (2Mm Instead Of 3Mm) To Reduce Print Time And Material Waste. - Centered The Anet A8 Text For Making The First Layer More Sticky On The Corner In Witch Was The Text Before. Please Report Any Issues In The Comment Section And I Will Try To Solve It Applying Updates To The Files. Thank You. <!!!!!!!!!!!!!> If You Like My Design, Feel Free To Click The "Leave A Tip" Button On My Profile To Encourage Me To Continue Design Anet A8 Things.

Statistics

Likes

1784

Downloads

0