Rack for filament spools
Description
A Bracket For A Filament Spool Shelf Or Rack. I Used 3 Of Them For A 1 Meter Wide Shelf. I Used 2 Round Wooden Broomsticks As Carriers. You Can Used Anything With 25 Mm Diameter Or Less. I Also Took 2.5 Mm Thick Steel Wires And Glued Them Into The Small Hole. This Makes The Plastic Bracket Much Ore Stable. The Wall Mounting Holes Have A Central To Center Distance Of 85 Mm. Cut Out The 2 Supporting Ribs, That Separate The Round Hole From The Slot. This Allows You To Screw A Regular 3 Or 3.5 Mm Screw Into The Wall, Slide The Bracket Over The Screw Heads And Just Pull Them Down A Bit To Get The Screws Into The Slots.
Statistics
Likes
33
Downloads
0