MeCreator2 Belt Tension Stabilizer
Description
Hi Guys! I Have Heard That 3D Printers With Belts That Are Tensioned Using Springs Have A Tendency Of Having Artifacts In The Print Due To The Belt Changing Tension As The Motors Change Direction. In A Attempt To See If There Is Indeed A Difference In Print Quality, I Sat Down Today And Came Up With These Brackets. For The Mecreator2, You Will Need To Print 2 Of Them, And Use A Total Of 4 Small Zip Ties. They Are Designed To Straddle The Spring Tensioner Located On The 2, Y Axis Belts. They Should Be Secured In Place Using 2 Small Zip Ties Per Side Where The Grooves Are On The Bracket. While This Was Designed For The Geeetech Mecreator2, I Can'T See Why This Wouldn'T Work With Other Printers Using The Same Tensioning System. Here Is A Link To My Video For This Model: Https://Youtu.Be/Rpw-G5Ylmem Special Thanks To Bastien. The 2 Ends Of This Bracket Were Made Possible By His Model Listed As The Original.
Statistics
Likes
12
Downloads
0