Ubiquiti RouterStation Pro case
Description
Not My Design - Printed For A Friend Who Found The Original Designs From Sigma Projects: Https://Www.Sigmaprojects.Org/Projects/View/Routerstation-Pro-Case There Are Three Designs Available On The Above Site, But Looking At The Three, I Decided That The Second Was Going To Be The Easiest For Me To Print With The Least Amount Of Support Material. The Original V2 Top Had Bumps On It For Stacking, So I Removed Them So I Could Print The Top Upside Down On The Build Plate And Not Need Support Material Around The Bumps. Then, To Reduce Material Usage, I Created A Hex Cutout Pattern And Included An "Nlm" Logo To Remind My Friend To Never Lose Momentum. Any Resemblance To Anything Other Than A Stylized "Nlm" Logo Is Completely A Figment Of Your Imagination. ;) I'Ve Included The Original Stl Files For The V2 Design From The Sigma Projects Site, As Well As My Original Cleaned Router Top (Router-Top-Revised), Plus The Vented Router Top With The Nlm Logo Insert. The Insert Is Taken Directly From The Cutout On The Top And As Such Will Not Cleanly Insert If Printed At 100%. It Should Really Be Offset Down, I Printed It Scaled Down And Still Had To Sand And File It To Get It To Press Fit. I'Ve Included The Sketchup File That I Used To Redo The Router Top, In Case You Would Like To Change Anything.
Statistics
Likes
8
Downloads
0